General Control - Sharp HT-SB600 Operation Manual

General control

To turn the power on
Press the ON/STAND-BY button on the main unit or the
remote control.
●
The power turns on. If the power does not turn on,
check whether the AC power lead is plugged in
properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again on the main unit or
the remote control.
Display brightness control
Press the DIMMER button to adjust the brightness of the
display.
(Display is dim)
Dimmer 1
Dimmer 2
(Display gets dimmer)
Dimmer off
(Display is bright)
Clock display
Clock can be displayed
during power On or standby
mode.
Display clock:
Press the CLOCK button on
the remote control. The time
display will appear for about 5
seconds.
To cancel the time display manually press the clock
button again within 5 seconds.
Note:
If clock not previously set, "ADJUST" will be displayed for
a whilst. (Refer "Setting the clock" on page 18)
Volume auto fade-in
If you turn off and on the unit with the volume set to 80 or
higher, the volume starts at 40 and fades in to the last set
level.
Main unit operation:
HDMI
ARC
1 2 3
TV
Press the VOLUME + button to
DIGITAL LINE
increase the volume and the
1 2 1 2
CLOCK TIMER
VOLUME – button for
decreasing.
DIMMER TUNING TUNER(BAND)
Remote control operation:
EQUALIZER X-BASS BASS/TREBLE MUTE
Press the VOL + button to increase the volume and the
SUBWOOFER LEVEL CENTER LEVEL
VOL – button to decrease the volume.
PRESET
VOL VOL
The volume is muted temporarily
when pressing the MUTE button
VOL VOL
on the remote control. Press again
to restore the volume.
Note:
When the unit is turned off and back on again, muting is
cancelled.
Press the EQ button on the main unit or EQUALIZER
button on the remote control repeatedly to select the
desired equaliser mode.
MUSIC
CINEMA /GAME
SPORT
NEWS
DOLBY VS
The subwoofer level can be
adjusted.
To increase the level, press
the SUBWOOFER LEVEL
+ button.
To decrease the level, press the SUBWOOFER LEVEL
– button.
Notes:
●
When sound from the speaker is distorted, decrease
the subwoofer level.
●
When changing the subwoofer level, the output level of
the Subwoofer is also changed.
The centre speaker level can
be adjusted.
To increase the level, press
the CENTER LEVEL + button.
To decrease the level, press the CENTER LEVEL –
button.
Press and hold MUTE button on the remote control until
"TV SPK" or "SB SPK" appear on the display to toggle
sound output between this unit or TV.
E-15
Volume control
Muting
Equaliser
(for standard sound effect)
(for cinema/game sound effect)
(for sport broadcasting)
(for news)
(Dolby Virtual Speaker)
Subwoofer level control
Centre speaker level control
Speaker output selection (HDMI connection)
.....
0 1 2 99 100
MUTING
.....
-5 -4 +4 +5
.....
-5 -4 +4 +5