System Connections - Sharp HT-SB600 Operation Manual

System connections

Make sure to unplug the AC power lead before making any connections.
Subwoofer
AM loop
aerial
– +
FRONT
INPUT
CENTER
SUB
WOOFER
Purple
Speaker and Subwoofer connection
Connect the wire without insulation tube to the minus (–)
terminal, and the wire with coloured insulation tube to the
plus (+) terminal. Make sure to match the coloured
insulation tube with terminal colour before connection.
Purple
– + +
INPUT
Main unit
FM aerial
Wall socket
AC 120 V ~ 60 Hz
SPEAKERS
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
INPUT
Red
Green
Caution
●
Never mistake the FRONT, CENTER and the
SUBWOOFER terminals. The main unit or the
speakers may be damaged.
●
If you use other speakers with an impedance lower than
that specified, the main unit may be damaged. Front
speakers: 4 ohms, Subwoofer: 4 ohms.
●
Do not make a mistake when
connecting the right and the left
speakers. The right speaker is
the one on the right side when
you face the unit.
●
Do not let the bare speaker
wires touch each other.
●
Do not allow any objects to fall
into or to be placed in the bass
reflex duct.
●
Do not stand or sit on the subwoofer/speakers. You may
be injured.
E-10
White
Sound Bar
INCORRECT