Sending A Fax With Sub-Address - Panasonic Panafax UF-4100 Operating Instructions Manual

Sending a Fax with Sub-Address

Use FLASH to separate the Telephone number and the Sub-Address.
1
Set document(s) face down.
2
Enter the telephone number, press
Sub-Address (up to 20 digits).
(Up to 36 digits including telephone number, pauses, spaces,
FLASH and Sub-Address)
Ex: Telephone number = 5551234, Sub-Address =2762
Enter as:
3
The document is stored into memory and your machine starts
to dial the number of the station and sends the document(s)
with Sub-Addressing information.
NOTE
FLASH
1
in the display.
2 Manual Off-Hook or On-Hook Dialling cannot be used with the Sub-Addressing Transmission.
3 The Sub-Address is not transmitted during Manual Redial Mode.
FLASH
FLASH
5 5 5 1 2 3 4
separates the Sub-Address from the Telephone number and is indicated by an "s"
Sub-Addressing
DOCUMENT SET
5551234s2762❚
then enter the
2 7 6 2
* STORE * 05%
83