Direct Transmission
If your machine's memory is full or you wish to send the document(s) immediately, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
2
3
4
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
5
Your machine starts dialling the telephone number.
NOTE
1 If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2 If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE TONE 5551234
3 To stop the transmission, press
The display shows:
COMM. STOP?
Press
Set document(s) face down.
8
9
1
(represented by a "/").
1
to stop the transmission.
Sending Documents
DOCUMENT SET
MEMORY XMT?
DOCUMENT SET
5551234❚
STOP
.
PAUSE
to
47