Access Code; General Description; Setting The Access Code - Panasonic Panafax UF-4100 Operating Instructions Manual

Access Code

General Description

The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code
is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting
or transmission, and the display returns to standby, you have to re-enter the access code in order to use the
machine again. Registering the Access Code does not affect the use of the machine in any other way.

Setting the Access Code

1
2
4
3
3
4
Enter a 4-digit Access Code.
Ex: 1 2 3 4
5
6
Select Restriction Level.
1 for All operations
or
2 for Setting and Printing the Fax Parameters only.
Ex: 2
7
NOTE
1 To erase the Access Code, enter the Access Code and press
procedure above to Step 3, then press
7
8
SET MODE
NO.=❚
START
SET
CLEAR STOP
and
(1-8)
(01-99)
❚ ❚ ❚ ❚
1234
ALL<>
PARAMETERS<>
and follow the
.
75