2. Unclip the memory module as shown in Fig. 3
3. Remove the memory module from its slot and put it aside.
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see
perform the following steps:
1. Unscrew the screws as shown in Fig. 4 to remove the HDD cover.
2. Release the screws that secure the HDD as shown in Fig. 5, and carefully pull out
the HDD assembly.
Fig. 3 Removing the memory module
Fig. 4 Removing the hard disk drive cover
Packard Bell EasyNote C3 Disassembly Manual
Removing the
Battery), then
M3x6 silver
6