Attach The Rail To The Header Bracket - Craftsman 139.53964SRT Owner's Manual

Header Wall
/ Header Bracket
INSTALLATION STEP 3
Attach the Rail to the
Header Bracket
NOTE: (Optional) With an existing Craftsman
installation, you may re-use the old header bracket
with the two plastic spacers included in the hardware
bag. Place the spacers inside the bracket on each
side of the rail, as illustrated.
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base. NOTE: If the door spring is in the
way you'll need help. Have someone hold the
opener securely on a temporary support to allow
the rail to clear the spring.
• Position the front rail end within the header bracket
and join with a 5/16"x1-1/2" clevis pin as shown.
• Insert a ring fastener to secure.
Mounting
MOle
Door
Spacer
Mounting
Hole
OPTION WITH
EXISTING CRAFTSMAN
INSTALLATION
Opener Carton or
Support
HARDWARE SHOWN ACTUAL SIZE
O
Clevis Pin 5/16"x1-I12" Ring fastener
15