Sears Recommends The Following Accessories; Recommended Accessories; Prohibited Accessories - Craftsman 113.234940 Owner's Manual

Sears Recommends the Following Accessories
Recommended Accessories
WARNING: To avoid injury from unsafe accesso- I
ries, use only accessories shown on the recom-
I
mended accessories list in this manual.
Leg Set ................................................................ 9-22246
Dust bag .............................................................. 9-23467
Clamp Accessory ................................................. 9-29000
Extension Accessory ........................................... 9-29001
Crown Molding Accessory ................................... 9-29002
Sawdust Collection Hose ..................................... 9-17866
Basic Blade Requirements
8-1/4" Diameter
Blades marked !or 5,500 RPM or higher.
5/8" Arbor Hole
Recommended for Miter Saws
Carbide Tipped Sawblades
WARNING: Read warnings and conditions on your
carbide sawblade.
Do not operate saw without proper sawblade
guard in place. Carbide is a very hard but brittle
material. Care should be taken while mounting,
using and storing carbide blades to prevent acci-
dental damage. Slight shocks, such as striking tip
during handling, can seriously damage the blade.
Foreign objects in the workpiece, such as wire or
nails can also cause tips to crack or break off.
Never use blade on saw that will exceed maximum
recommended blade R.P.M. Always wear proper
eye protection which complies with current ANSI
standard Z87.1 when using any power tool. Before
using, always: visually examine blade and tips for
bent blade, cracks, breakage, missing or loose
tips; or other damage. Do not use if damage is sus-
pected. Mount blade securely in proper rotation
direction. Failure to heed all safety instructions
and warnings regarding use of this product can
result in serious bodily injury.
Prohibited Accessories
WARNING: The use of any cutting tool except 8-1!4"
saw blades which meet the requirement under rec-
ommended accessories is prohibited. Do not use
accessories such as shaper cutters or dado sets.
Metal cutting and the use of abrasive wheels is pro-
hibited.
|
26