Unpacking And Checking Contents; Tools Needed; Unpacking - Craftsman 113.234940 Owner's Manual

Unpacking and Checking Contents
Tools Needed
Combination Square
1t4" Hex "L" Wrench
(Supplied)
Adjustable Wrench
Unpacking
WARNING: To avoid injury from unexpected start-
ing or electrical shock, do not plug the power cord
into a power source outlet during unpacking and
assembly. This cord must remain unplugged
whenever you are working on the saw.
Your model of Miter Saw is shipped complete in one box.
WARNING: Although compact, this saw is heavy.
To avoid back injury, get help whenever you have
to lift the saw.
1. Before removing the saw from the shipping carton
Combination Square Must be True
Straight Edge of
Draw Light Board 3/4" Thick
Line on Board This Edge Must be
Along this Edge ¢,_, Perfectly Straight
Should be no Gap or Overlap when Square
is Flipped Over in Dotted Position
tighten the carriage lock knob to guard against sudden
movement.
2. Remove the miter saw from the carton by lifting with
the handholds located at the base of the saw.
WARNING: if any part is missing or damaged, do
not plug the saw in until the missing or damaged
part is correctly replaced. To avoid electric shock,
use only identical replacement parts when servic-
ing double insulated tools.
3_ Place the saw on a secure, stationary work surface
and look the saw over carefully.
List of Loose Parts
The following parts are included:
NOTE: Before beginning assembly, check that all paris
are included. If you are missing any part do not assem-
ble the saw, Contact your Sears Service Center to get
the missing part. Sometimes small parts can get lost in
packaging material. Do not throw away any packaging
until saw is put together. Check packaging for missing
parts before contacting Sears, A complete parts list
(Repair Par[s) is at the end of the manual. Use the list to
identify the number of the missing part.
Part or Assembly Qty.
A. Basic Saw Assembly ................................................ 1
B. Clamp Assembly (shown on saw) ............................. 1
C. Dust Elbow ............................................................... 1
D, Combination Wrench ................................................. 1
(Assembled on saw)
E, Form Owner's Manual ............................................... 1
F. Registration Form ...................................................... 1
A
Carriage
Lock Knob
C
Hand Hold