Craftsman 113.234940 Owner's Manual page 15

Mounting The Miter Saw (continued)
Portable Applications
Plywood mount helps protect saw from damage during
the rough handling associated with portable miter saw
usage.
To mount the saw to a 3/4" piece of plywood, use the
three, 5/16 bolt holes A, B and C or` the four 5/16 bolt
holes A, B, D and E or the four drywall screw holes. The
mounting board can then be clamped down to prevent it
from tipping.
Work Bench Applications
Mount as specified in portable applications. Check for
workpiece clearances to left and right of saw.
Leg Set Applications
To mount saws to below mentioned leg set, use three
holes marked A, B, and C. Attach with hardware shown,
through legset holes indicated by "°" (below).
I
,,_8___ $_o
o
o
o
o
0
©
0
oO
_k_k Stiffener_Side
l C Oo o O
O
o
O
O
O
©
o [---) o
' Stiffenei_E_nd
Catalog No. 9-22246 Leg Set
Legset Mounting Holes for Miter Saw
Attach miter saw to holes/slots that are blackened in "°"
Recommended mounting hardware (not included)
Qty
5/16-18 x 1-1/2 hex head bolts (front) .......................... 3
5/16 Iockwashers ......................................................... 3
5/16 he× nuts ................................................................ 3
15