Unpacking And Checking; Tools Needed - Craftsman 113.242720 Owner's Manual

r
UNPACKING AND CHECKING CONTENTS
TOOLS NEEDED
Medium Screwdriver
Hammer _
#2 Phillips Screwdriver
_, ::::i:;': =======================================
3/e i.._/le i ..
112 in. 9116 in.
Combination Square 3/4 in.
COMBINATION SQUARE MUST BE TRUE.
STRAIGHT EDGE OF BOARD
3/4" THICK. THIS EDGE MUST
DRAW LIGHT LiNE ON BE PERFECTLY SI_AIGHT.
BOARD ALONG THIS EDGE, _'_\
\
SHOULD BE NO GAP OR OVERLAP
HERE WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION.
Model 113.242700 Motorized Table Saw is shipped
complete in one carton but DOES NOT INCLUDE Table
Extensions and Steel Legs.
Model 113.242720 Motorized Table Saw is shipped
complete in one carton but INCLUDES TWO Table
Extensions and Steel Legs.
Separate all parts from packing materials and check each
one with the illustration and the list of Loose Parts to make
certain all items are accounted for, before discarding any
packing material.
If any parts are missing, do not attempt to assemble the
table saw, plug in the power cord or turn the switch on
until the missing parts are obtained and are installed
correctly.
C
D
J H G
WARNING: FOR YOUR OWN SAFETY, NEVER
CONNECT PLUG TO POWER SOURCE OUTLET UNTIL
ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU
HAVE READ AND UNDERSTAND THE SAFETY AND
OPERATIONAL INSTRUCTIONS.
Key
No.
LIST OF LOOSE PARTS
Part Name Qty.
A Miter Gauge .............................. 1
B Rip Fence ............................... 1
C Blade Guard and Spreader ................... 1
D Handwheel ............................... 2
E Rip Fence Guide Bar, Rear .................. 1
F Rip Fence Guide Bar Rod ................... 1
G Rip Fence Guide Bar with Rip Scale (Front) ..... 1
H Arbor Wrench ............................ 1
J Arbor Nut Wrench ......................... 1
K Owners Manual ........................... 1
Bag of Miscellaneous Small Parts No. 62769
Consisting of the following:
L Spreader Support .......................... 1
M Spreader Clamp ........................... 1
N Spreader Bracket .......................... 1
P Setscrew Wrench, 1/8 in ..................... 1
P Setscrew Wrench, 3/16 in .................... 1
Q Switch Key .............................. 1
S Soc. Hd. Set Screw 1/4-20 x 7/8 .............. 2
T Square Nut, 1/4-20 ........................ 2
X Lockwasher #10 External Type
(approx. dia. of hole 3/16 in.) ............... 2
Y Wing Screw, 1/4-20 x 1/2 in. long ............. 2
AA Screw, Pan Hd. 10-32 x 3/4 .................. 2
Pk_ of Miscellaneous Small Parts No. 62768
Consisting of the Following:
R Guide Bar Spacer .......................... 2
U Self Threading Nut ......................... 2
V Flatwasher, (dia. of hole 17/64 in.) ............ 4
V Flatwasher, (dia. of hole 21/64 in.) ............ 4
V Flatwasher, 17/64 x 5/8 x 1/16 ............... 8
W Hex Nut, 1/4-20
(Approx. dia. of hole 1/4 in.) ............... 6
W Hex Nut, 5/16-18
(approx. dia. of hole 5/16 in.) ............... 4
R
6