Unpacking And Checking - Craftsman 137.214090 Operator's Manual

RECOMMENDED ACCESSORIES
To avoid injury:
Use only accessories recommended for this band
saw.
Follow instructions that accompany accessories. Use
of improper accessories may cause hazards.
Use only accessories designed for thisband saw to
avoid injury from thrown broken parts or workpieces.
Do not use any accessory unless you have
completely read the instruction or operator's manual
for that accessory.
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the following
accessories:
ITEM
Miter gauge
Blade width: 1/8" to 3/8"
Blade length: 59" to 59-1/4,"
UNPACKING AND CHECKING CONTENTS
Carefully unpack the band saw and all its parts, and
compare against the illustration following. Place the saw
on a secure surface and examine it carefully.
To avoid injuryfrom unexpected starting, do not plug
the power cord into a power source receptacle
during unpacking and assembly. This cord must
remain unplugged whenever you are assembling or
adjusting the saw.
Although compact, this saw is heavy. To avoid back
injury, get help whenever you have to lift the saw.
If any part is missing or damaged, do not plug the
band saw in until the missing or damaged part is
replaced, and assembly is complete.
Band Saw Assembly
_le Assembly
Hex. Wrench
! 2 Bolt
/_ Spring Washer
Miter
Gauge Hex. Nut
j-
6