Nt8D35 Network Module - Nortel 1000M Overview

Communication server and meridian 1 large system

Hide thumbs Also See for 1000M:

Table of Contents

Figure 8

NT5D21 Core/Network module

NT8D35 Network module

This module provides the network switching functions in the Meridian 1

Option 81C, Meridian 1 PBX 81C CP PIV, and CS 1000M MG.

Two Network modules are required to make a full network group of 32

loops. A maximum of 16 Network modules (eight network groups) can be

configured in the Meridian 1 Option 81C, CS 1000M MG, and Meridian

1 PBX 81C CP PIV.

The Network module houses up to four NT8D04 Superloop Network

Cards, for a total of 16 network loops. Superloop network cards are

cabled to the backplane of an IPE module. In a typical configuration, one

Conference/TDS card is configured in the module, leaving 14 voice/data

loops available. In CS 1000M MGand Meridian 1 PBX 81C CP PIV, the

Conference/TDS cards are located in the Core/Network module. The Clock

Controller must be installed in slot 13.

Figure 9 "NT8D35 Network module" (page 28)

the module.

Communication Server 1000M and Meridian 1 Large System Overview

Nortel Communication Server 1000

NN43021-110 02.05 Standard

30 September 2008

System modules 27

shows the cards housed in

Table of Contents

Table of Contents

Meridian 1 large