Installing The Software Over The Air - Nortel 3100 User Manual

Installing your MCC 3100 for Windows Mobile
4. Use the controls to locate the software file to be installed and click
Download.
5. Click Save, navigate to the folder where you want to store the
software file on your computer, and click Save.
6. Connect the mobile device to your computer with a USB cable.
7. Start Microsoft ActiveSync on your computer.
8. Locate the software file on your computer.
9. Double-click the software executable file and click Run.
10. On the Setup Wizard, click Next.
11. Accept the license agreement and click Next.
12. Select a Destination Location folder and click Next.
13. Select a Start Menu folder and click Next.
14. Click Install to begin the installation on your computer.
15. If you are prompted to reinstall or upgrade the application, click Yes.
16. Click OK.
17. Click Finish.
18. On your device, if prompted, select Yes to allow the software to be
installed on the mobile device.
19. On your device, if prompted, select OK to install the new version of
the application on the mobile device.
20. Acknowledge licensing and security prompts that appear during the
process of installing the application on the mobile device.
The software installation proceeds on the mobile device.
21. Complete all other installation tasks, for example, the installation of a
security certificate, if directed by your system administrator.

Installing the software over the air

With this method, you can maintain MCC 3100 software directly from your
Windows Mobile device using a wireless (over the air) connection to the
Internet. To complete the initial installation, you open a browser on your
Windows Mobile device, access the software web site, and then
22 NN42030-107 MC 3100 3.0 Standard 02.02 November 2008