Print Speed - Oki OKIPOS X400 Manual

Command Structure <ESC>CSa
Command Function To specify a unique print speed through software for a particular label. This
Input to Printer
Printer Output
Special Notes
This becomes the new setting in the printer configuration for all subsequent print
jobs, unless changed. The settings is stored in non-volatile memory and is not
affected by cycling the power.

Print Speed

a = Designates the speed selection.
1 =
2 =
3 =
4 =
Example: <ESC>CS3
Placement: Must be placed immediately after <ESC>A and immediately before
<ESC>Z in its own data stream.
Default: As previously set in the printer configuration.
allows flexibility in finding the best performance and quality for the particular
label format, media, and ribbon. All subsequent labels will print at this speed
unless the speed is changed with this command.
<ESC>A
<ESC>CS3
<ESC>Z
There is no printer output for this command. It sets the print speed of the
printer to 3 inches per seconds.
1 ips (25 mm/s)
2 ips (50 mm/s)
3 ips (75 mm/s)
4 ips (100 mm/s)
59