Media Size - Oki OKIPOS X400 Manual

Command Structure <ESC>A1aaaabbbb
Command Function To set the size of the media.
Input to Printer
Printer Output
Special Notes 1.
2.
3.

Media Size

aaaa = Vertical Media Size in dots (0 to Vmax).
bbbb = Horizontal Media Size in dots (0 to Hmax).
Example: <ESC>A132000832
Placement: Separate data stream to the printer.
Default: <ESC>A136000832
<ESC>A
<ESC>A108320812
<ESC>Z
There is no printer output resulting from this command. It is used to auto
-matically adjust the offset values for the size of label being used.
The Base Reference point is always on the right (looking at the front of the
printer) side of the print head. This command adjusts the Base Reference Point
to correspond with the right edge of the loaded media.
If the label size is changed, then this command must be respecified to
centralize the print image on the label.
All eight variables ("aaaa" and "bbbb") must be included in this command.
54