Print Darkness ．．．．．．．．．．．．．．．．．．．．．．50 - Oki OKIPOS X400 Manual

Command Structure <ESC>#Ea
Command Function To specify a new print darkness setting. This command allows software control of the
Input to Printer
Printer Output
Special Note 1.
2.
3.
Print Darkness
a = Print darkness value
a = 1,2,3,4 or 5
Example: <ESC>#E2
Placement: Must be placed immediately after <ESC>A and immediately
before <ESC>Z in its own separate data stream.
Default: 2
darkness setting for unique media and ribbon combinations.
<ESC>A
<ESC>#E2
<ESC>Z
There is no printer output for this command.
This becomes the new setting in the printer configuration for all subsequent print jobs,
unless changed. This setting is stored in non-volatile memory and is not affected by
cycling power.
The lightest setting is the smallest value and the darkness setting is the largest value.
This command adjusts the print darkness in discrete steps. The range of this command
is set using the <ESC>CD Print Darkness Fine Adjustment command. Changing the
Print Darkness Fine Adjustment setting will affect this command.
50