Oki C9800hdn Software Installation Manual page 64

1
1-50 Installing User Software on a Windows Computer
4. When you have entered all the information, click Add.
5. With the device name (C9800) selected in the Devices list, click OK.
Device name of the
Fiery (C9800)
6. With the device name selected in the list of Available Servers, click Select to begin
—Choose the type of network protocol you are using from the menu.
Protocol
Fiery utilities are not supported over IPX/SPX. Command WorkStation is
N :
OTE
supported on Windows computers over TCP/IP.
—Enter the IP address (or DNS name) of the C9800.
Server Name
—Enter the name of the device the Fiery is installed in: C9800 .
New Device
Type C9800 exactly as shown because the device name is case-sensitive.
N :
OTE
The Fiery appears in the list of available servers. The first line of the entry displays the
nickname you gave the server, followed by the protocol you chose. The second line
displays the device name.
using the utility.
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery server or network,
such as a server name or IP address. If you change Fiery Setup information, do so
before reconfiguring the connection.