Oki C9800hdn Software Installation Manual page 25

1
1-11 Setting up PostScript or PCL printing with Windows 98/Me
8. Select "Display a list of all the drivers in a specific location, so you can select the
driver you want," and then click Next.
9. Select "Show all hardware."
10. From the Manufacturers list, select "(Standard port types)." From the Models list,
select "ECP Printer Port" (not Printer Port). Click Next.
11. Click Yes in the Update Driver Warning dialog box.
12. Click Next.
13. Click Finish, then close the Printer Port Properties and System Properties dialog boxes.
You must restart your computer to activate the new settings. After Windows 98/Me
restarts, complete the procedure described in
printing" on page 1-8.
Completing the Windows 98/Me IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print connection for the C9800. For details, see your NetWare documentation and
Chapter 2 of the Configuration Guide.
To print from Windows 98/Me computers over IPX (Novell), you must first set up
IPX/SPX protocols, and then configure the C9800 by choosing the IPX frame type
and entering the settings for the port you use.
"To prepare the printer for parallel port