Oki C9800hdn Software Installation Manual page 26

1
1-12 Installing User Software on a Windows Computer
T
O SELECT A FRAME TYPE FOR
W 98/M
FOR INDOWS E
1. Click Start, choose Settings, and then choose Control Panel.
2. Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol is listed in the installed network
components pane.
For instructions, see your Windows 98/Me documentation or contact Microsoft
Technical Support.
3. Double-click the IPX/SPX-compatible Protocol icon.
4. Click the Advanced tab.
5. Select Frame Type in the Property list.
6. In the Value menu, choose the Frame Type that corresponds to the one set in Fiery
Network Setup.
If necessary, print the Configuration page from the C9800 Printer Control Panel to
determine which frame type(s) are configured.
IPX/SPX
PRINTING