Oki C9800hdn Software Installation Manual page 52

1
1-38 Installing User Software on a Windows Computer
Setting up IPP printing with Windows 2000/XP/Server 2003
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery over
the Internet.
IPP printing is supported directly for Windows 2000/XP/Server 2003 computers. IPP
printing is not supported on Windows NT 4.0.
The IPP setup procedures are performed after installing the appropriate printer
N :
OTE
drivers (see "To install the PostScript or PCL printer driver for Windows
2000/XP/Server 2003"
B
EFORE YOU BEGIN
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing. For more information, see Chapter 4
of the Configuration Guide.
3. Specify the printing destination on your computer.
T IPP
O SET UP PRINTING WITH
2000/XP/S 2003
ERVER
1. Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and
Faxes.
2. Windows 2000: Double-click the Add Printer icon and click Next.
Windows XP: Click Add Printer.
Windows Server 2003: Choose Add a printer
3. Select Network printer and click Next.
on page 1-27).
W
INDOWS