Formatting The Array; Shutting Down The Array; Setting The Language - HP Surestore Disk Array 12h - And FC60 Service Manual
Hp surestore e disk array 12h user's and service manual (c5445-90901, september 1999)
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- Advanced user's manual (466 pages) ,
- User manual (310 pages)
Table of Contents
Advertisement
Operating the Control Panel
Using the Control Panel Buttons
Formatting the Array
CAUTION! Once Logical Drives (LUNs) have been created on your disk array, you will not
be permitted to Format the disk array again. You must delete all of the existing Logical
Drives before a disk array can be formatted. Deleting Logical Drives (LUNs) and formatting
the disk array destroys all data on the disk array. Before formatting a disk array, make
backup copies of the entire disk array, or you will lose all data.
1.
Follow the earlier procedure called "Deleting a Logical Drive" to delete all LUNs.
2.
Select the Cntrl Changes from the main menu.
3.
Select Format Array.
4. Select Confirm.
Shutting Down the Array
NOTE! Shutting down the array will take it offline.
1.
Select the Shutdown from the main menu.
2. Select Confirm.
Setting the Language
1.
Select the Language from the main menu.
2.
Select a language.
3. Select Confirm.
74
Advertisement
Table of Contents
Troubleshooting
