HP Surestore Disk Array 12h - And FC60 Service Manual page 167

Event Event Name
Number
(DEC/hex)
Microprocessor
164/0xa4
Software Fault
Microprocessor
165/0xa5
Hardware Fault
166/0xa6 Internal SCSI
Event
Event Predictive
Logged Maintenance
Implication
Y More than 1
in 1 month
Y More than 1
in 1 month
Single
Y
Occurrence not
with other
entries
Event Code Descriptions
Suspected Description
Components
Controller A problem occurred which
caused the microprocessor to
vector to the software fault
interrupt service routine. The
controller always resets
following this log entry. This
error is caused by illegal
instruction fetches, divide by
zero, or other illegal processor
activity.
Controller A problem occurred which
caused the microprocessor to
vector to the hardware fault
interrupt service routine. The
controller always resets
following this log entry. This
error occurs when the
microprocessor attempts an
illegal interrupt vector.
This is an error detected by the
Disk Drive
interface driver during a bus
Controller
scan, or an error that cannot be
Internal SCSI
linked to a particular
Bus
command. It is normal for
this event to accompany hot
plug events. If it occurs
independent of any hot plug
events, it may indicate a
hardware failure.
Troubleshooting
167