HP Surestore 125ex - Optical Jukebox Manual page 69

3
3
O
PERATING THE
The jukebox controller uses two SCSI IDs if your jukebox has one drive and three IDs if your jukebox has two drives.
The jukebox controller is assigned one ID and one ID is assigned to each disk drive.
The default SCSI IDs are as follows
• jukebox controller = 3
disk drive 1 (lower drive) = 4
NEXT
disk drive 2 (upper drive in a two-drive model) = 5
If you are already using one of these IDs for your host bus adapter or another SCSI peripheral device, follow the direc-
PREVIOUS
tions in one of the next two sections to change either the jukebox controller or a drive ID.
C
HANGING THE
JUMP
Start with READY or SECURE in the display.
1. Press
CONTENTS
2. Press
3. Press
INDEX
4. Press
5. Press
AC ID * displays again. The ID you chose is now set.
6. Press
J
UKEBOX
J
UKEBOX
until SCSI ID * displays.
NEXT
. AC ID * displays. ("AC" is the "jukebox controller.")
ENTER
. AC ID 3 displays.
ENTER
NEXT or PREV until the ID you want displays.
. SET # (# is a number from 0-7) displays briefly and then
ENTER
two times to return to the READY state.
CANCEL
C ID
ONTROLLER
30