HP Surestore 125ex - Optical Jukebox Manual page 54

3
3
O
PERATING THE
11. Press
12. Press
13. Press
NEXT
14. Press
15. Press
PREVIOUS
16. Press
17. Press
JUMP
18. Press
Caution:
CONTENTS
19. Turn the jukebox to STANDBY, then ON to save the code in jukebox memory.
INDEX
NOTE:
J
UKEBOX
After entering the current security code in the previous steps, you are prompted to enter a new three-digit security code.
ENTER . NEW 1 and a flashing digit displays (the previous code 1).
NEXT until the first number you want in your security code displays
. NEW 2 and a flashing digit displays (the previous code 2).
ENTER
until the second number you want in your security code displays.
NEXT
. NEW 3 and a flashing digit displays (the previous code 3).
ENTER
until the third number you want in your security code displays.
NEXT
. SET 17 displays briefly.
ENTER
to return to READY.
CANCEL
The next step is turn the jukebox to STANDBY.
Do not turn power to STANDBY in this jukebox until you are sure the SCSI bus is inactive. Removing power from a SCSI
peripheral when the bus is active can result in data loss and/or indeterminate bus states. Check your host system manuals for
information about checking the SCSI bus status.
You can limit access to your jukebox by setting certain security options. See Table 3-1 for information about
configurations 15, 20, 31, and 32.
15