HP Surestore 125ex - Optical Jukebox Manual page 57

3
3
O
PERATING THE
Configurations that affect security of your disks in the jukebox are numbered 15, 17, 20, 31, and 32. Table 3-1 describes
these configurations.
During the process of setting the security configurations, you are prompted for your current security code. If you have
not changed the default security code, enter 0-0-0. If you have changed the security code to a different set of three dig-
its, enter your code. Setting a security code is described in "Setting a New Security Code" explained previously.
NEXT
Follow these steps to set a security option
Start with READY or SECURE in the display.
PREVIOUS
1. Press
2. Press
JUMP
3. Press
4. Press
CONTENTS
5. Press
6. Press
INDEX
7. Press
8. Press
9. Press
NOTE:
J
UKEBOX
until CONF * displays.
NEXT
ENTER . CONF 0 displays. (The 0 is flashing.)
NEXT until the number of the option you want to change displays.
ENTER . CODE 1 and a flashing 0 displays.
NEXT or PREV until the first number of your security code displays.
ENTER . CODE 2 and a flashing 0 displays.
NEXT or PREV until the second number of your security code displays.
ENTER . CODE 3 and a flashing 0 are displayed.
NEXT or PREV until the third number of your security code displays.
NO CONFIG displays if you entered the wrong security code.
18