HP StorageWorks MSA 2/8 - SAN Switch User Manual page 40

Adding Secure Fabric OS to the Fabric
2. Enter the pkicreate command. If the switch is a Core Switch 2/64, enter
3. Enter the pkishow command. If the switch is a Core Switch 2/64, enter
switch:admin> pkicreate
Installing Private Key and Csr...
Switch key pair and CSR generated...
Installing Root Certificate...
switch:admin>
switch:admin> pkishow
Passphrase
Private Key
CSR
Certificate
Root Certificate: Exist
switch:admin>
4. Repeat for any other switches, as required.
5. If the switch was segmented from the fabric, log into the switch and enter the
40
this command on both logical switches.
The pkicreate command does not work if Secure Mode is already
enabled.
this command on both logical switches.
The command displays the status of the PKI objects.
Example, recreating PKI objects on Fabric OS v4.1.x:
: Exist
: Exist
: Exist
: Exist
switchdisable and switchenable commands.
Secure Fabric OS Version 1.0 User Guide