HP StorageWorks MSA 2/8 - SAN Switch User Manual page 52

Creating Secure Fabric OS Policies
Note:
require significant effort and result in fabric downtime.
primaryfcs:admin> secmodeenable
This is an interactive session to create a FCS list.
Current FCS list is empty
Enter WWN, Domain, or switch name (Leave blank when done): 2
Switch WWN is 10:00:00:60:69:11:fc:54
Current FCS list:
10:00:00:60:69:11:fc:54
Enter WWN, Domain, or switch name (Leave blank when done):
10:00:00:60:69:11:fc:55
Switch WWN is 10:00:00:60:69:11:fc:55
Current FCS list:
10:00:00:60:69:11:fc:54
10:00:00:60:69:11:fc:55
Enter WWN, Domain, or switch name (Leave blank when done): Switch 24
Switch WWN is 10:00:00:60:69:11:fc:56
Current FCS list:
10:00:00:60:69:11:fc:54
10:00:00:60:69:11:fc:55
10:00:00:60:69:11:fc:56
Enter WWN, Domain, or switch name (Leave blank when done):
Are you done?
Is the FCS correct?
New FCS switch root password:
Re-enter new password:
New FCS switch factory password:
Re-enter new password:
New FCS switch admin password:
Re-enter new password:
New FCS switch user password:
Re-enter new password:
New Non FCS switch admin password:
Re-enter new password:
Saving passwd...done.
52
Record the passwords and store in a secure place. Recovering passwords may
For a sample CLI session, see the example provided on the following page.
The example enables Secure Mode and specifies three FCS switches, one each
by Domain ID, WWN, and switch name, on Fabric OS v3.1.x (v4.1.x may
differ slightly), using the command's interactive mode.
(yes, y, no, n): [no] y
(yes, y, no, n): [no] y
Secure Fabric OS Version 1.0 User Guide