Re-Creating Pki Objects If Required - HP StorageWorks MSA 2/8 - SAN Switch User Manual

switch:admin> pkishow
Passphrase
Private Key
CSR
Certificate
Root Certificate: Exist
switch:admin>
switch:admin> configshow "pki"
Passphrase
Private Key
CSR
Certificate
Root Certificate: Exist
switch:admin>
3. Verify that Certificate shows Exist.
4. Repeat this procedure for the remaining switches in the fabric.

Re-creating PKI Objects If Required

The PKI objects (except for the digital certificate) are automatically generated the
first time Fabric OS v2.6.1, v3.1.x, or v4.1.x is booted. If any of the PKI objects
appears to be missing, the switch segments from the fabric. The PKI objects on
Fabric OS v2.6.1, v3.1.x, and v4.1.x can be regenerated by rebooting the switch.
In addition, the PKI objects on Fabric OS v4.1.x can be regenerated through the
CLI.
To use the CLI to re-create the PKI objects on Fabric OS v4.1.x:
Note:
1. Log into the switch as Admin.
Secure Fabric OS Version 1.0 User Guide
: Exist
: Exist
: Exist
: Exist
Displaying PKI objects on Fabric OS v2.6.1 and v3.1.x:
: Exist
: Exist
: Exist
: Exist
If the certificate shows as Empty, but the other objects show as Exist,
repeat the procedure provided in
Switches" on page 35.
If any of the other objects show as Empty, re-create them as described in
"Re-creating PKI Objects If
Secure Mode must be disabled to perform this procedure.
Adding Secure Fabric OS to the Fabric
"Distributing Digital Certificates to the
Required" on page 39.
39