Management Access - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Does Secure Fabric OS prevent all unauthorized access?
Once Secure Fabric is turned on, can it be turned off again?
What happens if I create a policy with no members in it?
How do I prevent someone from adding a computer to the fabric and mounting a
LUN?

Management Access

What version of SSH and the SSH clients does Fabric OS v4.1.x support?
Secure Fabric OS Version 1.0 User Guide
Fabric Manager
Web Tools
Fabric Access (API)
There is no 100% protection in any network. However, the Secure Fabric OS
product makes it possible for the administrator to create a significantly
increased level of security that is customized to the fabric.
Yes, by using the secmodedisable command. Turning Secure Mode on
or off does not disrupt traffic.
You cannot create an empty FCS policy, but you can create other types of
policies with no members. However, creating a policy with no members closes
all access to that aspect of the fabric, which can result in preventing
administrative access to the fabric. Before setting a policy, read all the
information provided about that policy under
Policies Other Than the FCS
The following approaches can be used in conjunction, although no guarantees
can be made of absolute security:
Store all the FCS switches in a physically secure area.
Use hardware-based zoning.
Create a DCC policy for each switch in the fabric.
Create an Options policy.
Fabric OS v4.1.x supports version 2 of the SSH protocol. Any SSH client that
supports version 2 of the protocol is supported. For example, PuTTy or
F-Secure.
"Creating Secure Fabric OS
page 58
Policy" on .
Managing Secure Fabric OS
109