File Name; Pixel Mapping - Olympus STYLUS-7000 Instruction Manual

Resetting the file names of pictures Adjusting the CCD and adjusting the
[FILE NAME] image processing function
......... .......................................................................................................................................... [PIXEL MAPPING]
Folder name Folder name File name
DCIM .jpg
.jPg
Automatic Automatic
numbe[!ng .......................................................... numbering
-- Month: 1 to C
(A=October,
B=N .... ber,
C=December)
_ This function has afteady been adjusted at
factory shipping, and no adjustment is needed
right after purchase. Approximately once a
year is recommended.
For best results, wait at least one minute after
taking or viewing pictures before performing
pixeI mapping. If the camera is turned off
during pixel mapping, be sure to perform it
again.
To adjust the CCD and the image
processing function
Press the button when [START] (submenu
2) is displayed.
• The camerachecksand adjuststhe CCD andthe
image processing functionat the sametime.
AUTO
Day: 01 to 31
This resets the sequential number
for the folder name and file name
whenever a new card is inserted/I
This is useful when grouping images
on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names and
files names with sequential numbers.
The number for the folder name is reset to 100, and the
one for the file name is reset to 0001.
EN