Table of Contents
Advertisement
Taking pictures
with
[COMBINE
mNCAMERA
1]
Press the shutter button to take the first
frame.
2 Move the camera slightly in the direction of
the second frame.
Target
Pointer
Screen when combining
images from left to right
_/Move
the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
• The camerareleasesthe shutterautomatically.
Taking
pictures
with
[COMBINE
IN CAMERA
2]
.1. _ Use I_] to specify at which edge the next
picture is to be connected.
Direction for
combining the
next frame
2
Press the shutter
button to take the first
frame.
• A guide frame appears as a reference.
Guide frame
Joint area
_
To combine only two pictures, press the
[] button before taking a third frame.
Repeat
Step 3, to take a third
frame.
• After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
_
To exit the panorama
function
without saving
an image, press the MENU button.
_
If the shutter does not automaticaEly
release,
try [COMBINE
IN CAMERA
2] or [COMBINE
IN
PC].
1st frame
Compose the next shot so that the
joint area overlaps the guide frame.
Composition
of the 2nd frame
Press the shutter
button to take the next
shot.
_
To combine
only two pictures, press the
[] button before taking the third frame.
Repeat
steps _/and
_ to take a third
frame.
• After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
_[_ To exit the panorama
function
without saving
all image, press the MENU button.
iiiiiiiiiiiiiiiiiiiiii'ii_i!i_!_i:iiii!!iii!iii!!:i
EN
Advertisement
Table of Contents
