Table of Contents
Advertisement
je Tips
If the camera does not work as intended, or if an
error message is displayed on the screen, and you
are unsure of what to do, refer to the information
below to fix the problem(s).
Troub/eshQoting
Battery
..........
"The
camera
does
not work
battery
is installed."
• Insert recharged battery in the co_r_i _irection.
"Charging the battery" (p. 10), "Loa:di_ the battery .....................
and the xD-Picture Card
TM
(sold separately) into the
camera" (p. 11)
• Battery performance may have been reduced
temporarily due to low temperature. Take the battery
out of the camera and warm them by putting them in
your pocket for a while•
Shutter
button
"No
picture
is taken
when
the shUt_
button
is pressed."
• Set the mode dial to a position other than E].
• Cancel sJeep mode
To save battery power, the camera automatically goes
into sleep mode and the monitor turns off if there is
no operation for 3 minutes when the camera is turned
on. No picture is taken even if the shutter button is
fully pressed in this mode• Operate the zoom button
or other buttons to restore the camera from sleep
mode before taking a picture• tf the camera is left on
for 12 minutes, it automatically turns off. Press the
ON/OFF
button to turn the camera on.
• Wait until _(flash charge) stops blinking before
taking pictures•
iiiiiiiiiiiiiiiiiiiiiiiiii_iiiiiliiiiiiii!iil
EN
® With prolonged camera use, the internal temperature
may increase, resulting in automatic shutdown• If
this occurs, remove the battery from the camera and
wait until the camera has suffi ciently cooled• The
camera's external temperature may also increase
during use, however this is normal and does not
indicate malfunction.
Monitor
"it is difficult
to see the image
6n the
monitor."
® Condensation '_may have formed inside _h_ [nonitor.
Turn off the power, and wait for the camera
become acclimated to the surrounding temperature
and dry out before taking pictures•
"_ Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room•
"Vertical
lines
appear
on the screen."
® Vertical lines may appear on the screen when the
camera is pointed at an extremely bright subject in
situations such as clear weather conditions. The lines
do not appear, however, in the final still image.
"The
light
is caught
in the picture"
® Shooting with flash in dark situations results in an
image with many flash reflections on dust in the air.
® If the battery is removed and left out of the camera
for about 3 days'2, the date and time settings return to
the default settings and must be reset•
,2 The time until the date and time settings return
to the default setting varies depending on how
long the battery has been loaded•
"Setting the date and time" (p. 13)
Other
"There
is a noise
coming
from
inside
the
camera
during
shooting."
® The movement of the lens may make a noise even
if the camera is not being operated because the
autofoous function is active when the camera is ready
to shoot.
Advertisement
Table of Contents
