File Name; Priority Set; Dpi Setting - Olympus E-3 Instruction Manual

FILE NAME

When you take a picture, the camera assigns it a unique file name and saves it in a folder.
File names are assigned as shown in the illustration below.
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one saved
on the previous card, the new card's file numbers start at the number following the
highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at 0001.
If a card containing images is inserted, the file numbers start at the number following the
highest file number on the card.
• When both the Folder and File No. reach their respective maximum number (999 / 9999), it is
not possible to store additional pictures even if the card is not full. No more pictures can be
taken. Replace the card with a new one.

PRIORITY SET

You can customize the initial position of the cursor ([YES] or [NO]) on the [ALL ERASE] or
[FORMAT] screen.
8

dpi SETTING

You can set the resolution for printing images in advance. The set value is recorded on the card
with the images.
[AUTO]
[CUSTOM]
106
EN
Folder name
All folders
000 OLYMP
Folder number (100 – 999)
File name
Pmdd0000.jpg
Day
(01 – 31)
Month
Color space
(10, 11, 12 are
P: sRGB
numbered A, B, C)
_: Adobe RGB
Automatically set according to the image size.
You can make the desired setting. Press d to display the setting screen.
File number (0001 – 9999)
After taking 9999 pictures, the counter is reset to 0001 for the
next picture, the folder number increments by 1 to name and
create a new folder where the next image (file) is stored.