Panasonic Lumix DMC-ZS10 Owner's Manual page 61

Meanings of and required responses to major messages displayed on LCD monitor.
o Card is not of SD standard.
When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are
supported.
o Data read has failed.
--_ Check whether card has been inserted correctly (-_12).
O Data write has failed.
--_ Turn off power and remove card, before re-inserting and turning on power again.
Card may possibly be damaged.
o Try with a different card.
A card that has been used in another camera to record an AVCHD motion picture in a different
broadcast system cannot be used to record AVCHD motion pictures with this camera.
--_ Format the card with this camera. The data will be deleted.
If recording stops even when using a card of the recommended speed class (_14), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (448).
Motion picture recording may be automatically terminated with certain cards.
Folder numbers in use have reached 999.
--_ Save needed data on a computer or other device, and then use [Format] on the camera. (448)
Folder number is reset to 100 when performing [No.Reset] (--,46).
_, AV cable (supplied) is connected to camera.
--, To remove message immediately _ Press [MENU/SET].
--_ To change aspect ratio _ Change [TV Aspect] (_47).
@USB connection cable (supplied) is only connected to camera.
--_ Message disappears when cable is also connected to another device.
@Use a genuine Panasonic battery.
÷ Battery cannot be recognized as terminal is dirty.
--_ Wipe any dirt away from the battery terminal.
GPS may notwork inChina or inthe borderregionsof countries n eighboring China.(Current as of
December 2010)
VQT3G90 133