Panasonic Lumix DMC-ZS10 Owner's Manual page 55

You can connect directly to a
PictBridge-compatible printer for
printing.
Getting Ready:
° Charge the battery sufficiently. Or,
connect the AC adaptor (optional) and
DC coupler (optional).
° When copying pictures from the
built-in memory, remove any memory
cards.
° Adjust the print quality or other
settings on your printer, as needed.
• Do not disconnect the USB connection cable
when the cable disconnection icon _:_ is displayed
(mar not be displayed with some printers).
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
USB connection cable
(always use cable supplied)
Connect camera to printer
• Please make sure you use the supplied USB connection cable. Use of cables
other than the supplied USB connection cable may cause malfunction.
Use cursor button on the camera to select [PictBridge (PTP)],
and press [MENU/SET]
Use cursor button to select a picture to print and press
[MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (-->129))
IITo cancel print Press [MENU/SET]
_Do not use any other USB connection cables except the supplied one.
_Disconnect USB connection cable after printing.
@Turn off power before inserting or removing memory cards.
_When the battery begins to run out during communication, a warning beep sounds.
Cancel printing and disconnect USB connection cable. Use a sufficiently charged
battery or an AC adaptor (optional) and DC coupler (optional).
®AVCHD motion pictures cannot be printed.
VQT3G90
127