Panasonic Lumix DMC-ZS10 Owner's Manual page 25

Sets the picture quality of the motion picture that is recorded.
[] Recording Mode: _ I_ [] _ _] I_ _
[] Settings:
[AVCHD] in [Rec Mode]
..........................
[GFS] 1920x1080
[,FSH]
,,,
[GS]
.... 1280x720
[SH]
Approx. 17 Mbps
16:9
Motion JPEG] in [Rec Mode]
[HD]
[VGA] ,,
[QVGA]
1280x720 16:9
640x480 30 fps
.........
4:3
320x240
The bit rate is the amount of data per unit time. A higher value translates into a higher image
quality.
_About [GFS] and [FSH]
• The number of frames is set to 60i (60 fps for the sensor output).
_About [GS] and [SH]
• The number of frames is set to 60p (60 fps for the sensor output).
_The location information that was acquired in positioning is not recorded on motion
pictures recorded in [FSH] or [SH].
@[QVGA] only can be recorded to the built-in memory.
_To play back AVCHD motion pictures recorded with this unit on Panasonic Blu-ray Disc
Players (DMP-BD30/DMP-BD31!DMP-BD50) it is necessary to update the firmware of
the Blu-ray Disc Player.
You can download the latest firmware version from the following website.
http ://panasonic.netisupport/
VQT3G90
97