Panasonic Lumix DMC-ZS10 Owner's Manual page 5

For [GPS] menu setting procedures (-_38)
==When [GPS Setting] is set to [ON] or _'_Ps
In Recording Mode, an icon that indicates the positioning status is displayed on the
LCD monitor.
When positioning is executed successfully, your current location is stored in the
camera's memory, and the location name information appears on the screen.
Location name information
!-__1_On:.'_t=:_ i:!_::_Time:elapsedaft.er:Su-cce_sfulp_oS1_!_!p_! i
In last 5 minutes
From 5 minutesto 1 hourago
From 1 hour to 2 hours ago
More than 2 hours ago
l_ Positioning failed
_Even if GPS reception is good, it will take approximately 2 to 3 minutes
to successfully execute positioning under the following conditions; when
positioning is executed for the first time, or when positioning is executed after
the camera is turned off with the [GPS Setting] set to 0"_Ps and then turned on
again or when [GPS Setting] is set to [OFF].
'_The information of the current location stored in the camera's memory is deleted at
the following times. (The information recorded on the pictures during recording is not
deleted.)
• When [GPS Setting] is set to [OFF]
• When [GPS Setting] is set to _'_;s and then the camera's power is turned off
• When the setup settings are reset with [Reset]
='Information recorded on pictures
_lf the positioning is executed successfully, the following information is recorded on the
still picture or the motion picture you recorded (except when [Rec Quality] is set to
[FSH] or [SH]).
* Latitude/longitude
• Location name information (Country/region, province/state, city/borough/county, town/village,
landmark)
_(_[_ appears when the picture is played back.
='Location name information
_The location name information consists of location names and landmarks that are
found via a search of the camera's database based on the latitude and longitude
that were acquired in positioning, and the most appropriate items are displayed
(Sometimes the nearest items are not displayed.)
• If there are no location names or landmarks "---" is displayed even if positioning is successful.
Even when "---" is displayed, in some cases location name information can be selected in [GPS
Area
Select] (--W9).
• In some cases, the landmark that you are looking for may not have been registered. Location
name information, such as landmarks, is current as of December 2010. (Landmark types -_149)
_;The location name information (location name or landmark name) may be different
from the official name.
VQT3G90
77