Panasonic Lumix DMC-ZS10 Owner's Manual page 6

ii
Recording the place of recording with GPS
(Continued)
Recording Mode: _ J_ _ _ J_ J_ _ k'_
If there is a discrepancy in the displayed information such as the location name or if
positioning has failed, move to a place where the signals from the GPS satellite can be
received more easily, and update the positioning.
Select [Repositioning] from the [GPS] menu
Positioning starts.
The GPS status indicator lights during positioning.
GPS status indicator
• When you select [GPS] or "_GPS in the [GPS Setting] displayed in the Quick menu
(---_41) and close the Quick menu, positioning will be executed.
=Concerning the positioning intervals
Even if you do not manually update positioning, positioning is attempted automatically
immediately after the power has been turned on and at a fixed intervals after that
unless [GPS Setting] is [OFF].
When [GPS Setting] is [ON], positioning is tried at fixed time intervals even when the
power is off.
However, positioning is canceled under the following conditions.
° When the battery power is low and _ has appeared.
° When the power has not been turned on for a certain length of time.
==To display the GPS reception status
_Select [GPS Setting] from the [GPS] menu.
_Use the cursor button to select [INFO] and press [MENU/SET].
° You can start positioning by pressing [MENU/SET] again.
_GPS reception status display
C): Received GPS time
_*_: Number of GPS satellite signals received
*_ Latitude
GPS'
Longitude
8 VQT3G90