Panasonic Lumix DMC-ZS10 Owner's Manual page 28

Save a scene from a motion picture as a still picture.
Display the picture that you want to capture as a still picture
by pausing a motion picture during playback
Press [MENU/SET]
[GFS] [FSH] [GS] [SH] [HD] 2M
[VGA] [QVGA] 0.3M
16:9
4:3
eThe picture quality becomes slightly lower because of the [Rec Quality] setting of the
original motion picture.
It may not be possible to capture still pictures from motion pictures that were recorded
with a different camera.
A single motion picture can be split into 2 parts. This is convenient when you want to keep
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free
space on your card, such as when traveling.
Select [Video Divide] from [Playback] menu (-_38)
Select the motion picture to split with cursor button and then
press [MENU/SET]
Play back the motion picture and pause at the place to split
Press ! _ to decide the point to split the motion picture
• Confirmation screen is displayed. If you select [Yes], the operation is executed.
• The original motion picture that was split does not remain.
(There will only be the 2 motion pictures that were created after the split.)
During splitting, do not turn off the camera's power or remove the card or battery. If you
do so, the motion picture may be deleted.
÷Splitting a Motion JPEG motion picture will cause the order of pictures to change. It is
recommended to display with [Calendar] (Calendar Playback) or [Filtering Play].
®Splitting an AVCHD motion picture will not cause the order of pictures to change.
÷ It may not be possible to split motion pictures that were recorded with a different
camera.
100 VQT3G90