Table of Contents
Advertisement
Preparing the Answering System
Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from "2" to "7" or "AUTO" (for Toll saver*).
Your phone comes from the factory set to "4".
Make sure the unit is not being used and the handset is lifted off the
base unit.
Press (PROGRAM).
,,The TALK/MUTE indicator flashes.
2
3
Press IFLASH/CALL
WAIT/PLAYBACK}.
• "P" is displayed on the base unit.
Press (_.
• The current setting is displayed on
the base unit.
Press (_, or (_ to (_ to set the
number of rings.
0:
Selects "AUTO".
"A" is displayed.
2-7: The unit will answer after the
selected number of rings.
Press (PROGRAM).
•A beep sounds from the base unit.
TALK/MUTE
(PROGRAM)
(FLASH/CALL WAIT/PLAYBACKI
• You can exit the programming
mode any time by pressing (_.
*Toll saver (When
set to "AUTO")
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
2O
Advertisement
Table of Contents
