Panasonic KX-TG2227S Operating Instructions Manual page 49

2.4ghz digital cordless answering system
Hide thumbs Also See for KX-TG2227S:
Table of Contents

Advertisement

Answering System
Problem
Remedy
The answering system is on,
but incoming messages are
not recorded.
.The recording time is set to "Greeting
only". Select "1 minute", "2 minutes" or
"3 minutes" (p. 19).
.Memory is full. Erase some, or all, of
the messages (p. 32).
You cannot listen to the
.Make sure that the unit is not being
recorded messages,
used.
"_i']itil"
is displayed and the
.Memory is full. Erase some, or all, of
ANSWER ON indicator
the messages (p. 32).
flashes rapidly, and no new
messages are recorded.
You cannot operate the
answering system with the
base unit ....
.The handset user is operating the
answering system, or is engaged in an
outside call. Wait until the
IN USE/CHARGE/HOLD
indicator light
goes out.
You cannot operate the
answering system from a
touch tone phone.
.Make sure you enter the correct
remote code.
.The answering system may not
respond if the tones are too short to
activate the unit. Press each button
firmly.
.The answering system is off. Turn it
on (p. 39).
You cannot operate the
answering system with the
handset.
.Someone is operating the answering
system.
.You are too far from the base unit.
Move closer to the base unit.
.The unit is recording a message.
To answer the call, press _
or [_.
49

Advertisement

Table of Contents
loading

Table of Contents