Table of Contents
Advertisement
Preparing the Answering System
Day and Time
Make sure the unit is not being used and the handset is lifted off the
base unit,
1
2
3
4
5
6
Press (PROGRAM].
,,The TALK/MUTE indicator flashes.
Press IFLASH/CALL
WAIT/PLAYBACK].
• "P" is displayed on the base unit.
Press (_.
°"Set time" is announced from the
base unit. If previously adjusted, the
day/time will be heard.
Enter the current time (hour and
minute) using a 4-digit number.
(Ex. To set 9:30, enter "0930".)
•The 2 digits of the entered number is
displayed.
Press (_ to select "AM" or "PM".
Press (_ repeatedly to set the day.
Press (PROGRAM].
• The base unit announces the
day/time. The clock starts working.
• If 6 beeps sounds from the base
unit, the setting is not correct. Start
again from the beginning.
TALK/MUTE
Indicator
{PROGRAM]
(FLASH/CALL WAIT/PLAYBACK
• You can exit the programming
mode any time by pressing (_.
• In step 4, you cannot enter numbers greater than 12. Do not use military
time.
(To set 13:00 hours, enter "0100" and select "PM" by pressing (_.)
To check the day/time
Press
[PROGRAM]
"k [FLASH/CALL
WAIT/PLAYBACK]
"k (_.
• The base unit announces the current day/time. When finished, press (_.
18
Advertisement
Table of Contents
