Troubleshooting Tips - GE JGB900 Owner's Manual & Installation Instructions

Before you call for service...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
_i Possible Causes What To Do
Top burners do notlight Plug on range is not completely * Make sure electrical l)lug, is I)lugged,, into a live, properly
or do not burn evenly, inserted in the electrical outlet, grounded outlet.
(The frontright burneris Burner silts on the side of the * Remove tile burner heads and clean them. Check the
designed to have slightly burner may be clogged, electrode area for burned-on food or grease. See the
smaller flames between Care and cleaning of the range section.
the 6 and 9 o'clock
positions. This is normaL) hnproper burner assembly. * Make sure the burner parts are installed correctly.
See the Care and cleaning of the range section.
Burner flames very hnproper air to gas ratio. * If range is connected to I.P gas, contact the person
large or yellow
who installed votu" ran,_e or made the conversion.
Surface burners light The oven gas shut-off valve * To check the oven gas shtff-oft valve, remove the
but oven does not may have accidentally been w;ulning drawer
(,see
the Care and cleaning of the range
moved during clemfing or section) and look for the gas shut-off lever at the back
moving, of the l';lllge
Leveris
si_own closed.
PULL TOOPEN.
Sealed burnermodels
5O