Prohibit Changes To Interface Settings; Prohibit Changes To Network Settings; Record Copy And Print Per Account - Sharp AR-PB2A Operation Manual

KEY OPERATOR'S GUIDE

Prohibit Changes to Interface Settings

This program prevents modification of interface settings in the printer configuration menu. If this
program is set, the interface settings functions will not appear in the printer configuration menu.
To prohibit modification of interface settings, press the "PROHIBIT CHANGES TO INTERFACE
SETTINGS" box to display a check mark.
To enable modification of interface settings, press the checked box again to clear the check mark.

Prohibit Changes to Network Settings

This program prevents modification of network settings in the printer configuration menu. If this
program is set, the network settings functions will not appear in the printer configuration menu.
To prohibit modification of network settings, press the "PROHIBIT CHANGES TO NETWORK
SETTINGS" box to display a check mark.
To enable modification of network settings, press the checked box again to clear the check mark.

Record Copy and Print per Account

This program is used to enable or disable the printer auditing mode. If this program is set, the
internal auditor functions for the copier feature can also be applied to the printer feature.
If the printer auditing mode is enabled, a 5-digit account number that has been registered using a
copier key operator program must be specified on the setting screen of the printer driver when
printing is executed. If an improper number is entered or no number is entered, the print job will be
executed and the number of printed sheets will be accumulated against the account number 99999.
Number 99999 must be registered as an account number using a copier key operator program.
NOTES If this program is set, the account number 99999 cannot be used as a normal account number and the copier key
operator program "Account Limit Setting" will be ignored.
If the number 99999 has not been registered, the job without proper number will not be counted.
Test pages will not be counted against any account number.
However, only the NIC page will be counted against the number 99999 any time.
To enable the printer auditing mode, press the "RECORD COPY AND PRINT PER ACCOUNT" box
to display a check mark.
To disable the printer auditing mode, press the checked box again to clear the check mark.
When this program is set, the message indicating that the account limit setting of the copier feature
will be ignored will be displayed. Press the "OK" key.
46