Windows 98 With Plug & Play (Parallel Connections Only) - Sharp AR-PB2A Operation Manual

Example: The CD-ROM drive is designated as drive Q.
Printer driver
PCL5e
PCL6
PostScript
PPD
•
If either the 'Update Device Driver Wizard' window or the 'New Hardware Found' window
does not appear, follow the procedure of Windows 95/Windows 98 without Plug & Play.
3. Insert the PRINTER UTILITIES CD-ROM into a CD-ROM drive, specify the path shown in Table
2-2, and click the 'Next' button.
•
If your computer is configured for auto start, the license agreement will be displayed. Click the
'Cancel' button.
4. Highlight the desired printer driver and click 'Next' to continue.
5. Ensure that 'Yes' is checked to use the printer as the default printer. Click the 'Next' button.
6. Follow the instructions on your screen to install the supplied printer driver.
Windows 98 with Plug & Play (parallel connections only)
When using Windows 98 with plug & play*, follow the procedure below.
* The plug & play feature is effective if both the computer and peripheral equipment are equipped
with IEEE 1284 compliant parallel interface.
1. Ensure that the printer cable is connected between your computer and the printer and then turn on
the printer.
2. Start Windows on your computer.
NOTE Before installing the printer driver, be sure to close all other open applications.
PRINTING FROM A COMPUTER IN THE WINDOWS ENVIRONMENT
Table 2-2. Printer Driver Path
Operating system
Windows 95/Windows 98
Windows NT 4.0
Windows 3.1x
Windows 95/Windows 98
Windows NT 4.0
Windows 95/Windows 98
Windows NT 4.0
Windows 3.1x
Windows 95/Windows 98
Windows NT 4.0
Path
Q:\Option\English\9x_pcl5e
Q:\Option\English\Nt_pcl5e
Q:\Option\English\3x_pcl5e
Q:\Option\English\9x_pcl6
Q:\Option\English\Nt_pcl6
Q:\Option\English\9x_ps2
Q:\Option\English\Nt_ps2
Q:\Option\English\3x_ps2
Q:\Option\English\9x_psppd
Q:\Option\English\Nt_psppd
9