Table of Contents
Advertisement
Chapter 4 Using the Operation Panel
Introduction
This chapter describes procedures for using the operation panel to set and/or adjust a variety of the
printer's options and features. Information is provided on:
1. Accessing and using the printer configuration menus available from the operation panel
2. Switching from copier mode to printer mode
3. Two special features: confidential print and tandem print
Figure 4-1 shows the available printer keys located on the operation panel with the touch panel basic
screen in the printer mode.
Uses of the Operation Panel
The operation panel provides access to many of the printer's features and functions. Available options
include the ability to:
1.
Print configuration, demonstration, and test pages. These test pages provide information useful for
enhancing the printer's performance or diagnosing printing problems.
2.
Change the printer configuration parameters to work more efficiently with specific software
applications. Figure 4-2 provides a complete flow chart of the touch panel's display menus.
3.
Set up the network IP address and network port operation. (If no network interface card has been
installed, these settings do not appear.)
4.
Use key operator programs to adjust printer settings, such as the exposure setting to control
contrast on printed documents. Refer to Key Operator Programs in the next chapter.
PRINT
COPY
The indications of the operation panel and touch panel depend on the countries and regions.
READY TO PRINT.
8/ 11
1
1 .
2
11 17
2 .
8/ 14
1
3 .
2
5/ 8/
1
1
4 .
2
2
ONLINE
PAPER SELECT
OFFLINE
Figure 4-1. Operation Panel Key Locations
8/ 11R
1
2
4
8/ 11
1
5 .
2
AUDIT CLEAR
MENU
29
1
2
3
INTERRUPT
5
6
7
8
9
CLEAR
C
PROGRAM
0
P
CLEAR ALL
CA
START
Advertisement
Table of Contents
Troubleshooting
