Nw Setup; Outline Of The Nw Setup; Checking The Hardware And Software Requirements; How To Install The Nw Setup - Sharp AR-PB2A Operation Manual

PRINTING FROM A COMPUTER IN THE WINDOWS ENVIRONMENT

NW Setup

If the printer is used in NetWare environment, the NW Setup allows easy connection setup.

Outline of the NW Setup

The NW Setup is a setup tool for using a SHARP printer with a network card installed in a Novell
NetWare environment. Registration of printers to a NetWare server and parameter settings for a
network card can be performed by using a procedure with wizards.
For using the NW Setup, a Novell Client supplied by Novell must have been installed. Also before
starting the NW Setup, you must log in the NetWare server with the 'Administrator' privileges.

Checking the Hardware and Software Requirements

To use the NW Setup, the following hardware and software are needed.
NetWare server: IntranetWare (NetWare 4.x)
NetWare client: Novell Client 4.5 for Windows NT
Novell Client v3.0 for Windows 95/98
Client PC operating system: Windows 95, Windows 98, Windows NT 4.0
Printer: SHARP printer with a Print Server Card (AR-NC1D or AR-NC3D) installed

How to Install the NW Setup

To install the NW Setup, use the installer supplied with the CD-ROM. Follow the procedure described
in "Using the Installer in the CD-ROM" on page 7. Select the NW Setup in step 7 of this procedure.

How to Use the NW Setup

For information on how to use the NW Setup, see the PDF file (\doc\English\NWSetup.pdf) supplied
with the CD-ROM.
22