Connections; Installation; Connecting The Telephone Line Cord - Sharp AR-FX13 Operation Manual

Facsimile expansion kit

Hide thumbs Also See for AR-FX13:

Table of Contents

Chapter 1

CONNECTIONS

Plug one end of the telephone line cord into the socket on the machine marked "LINE." Plug the other side into a

standard (RJ11C) single-line telephone wall socket. Be sure not to plug this telephone line cord into the "TEL"

socket. The "TEL" socket is used to attach an extension telephone or answering machine to the machine. (See

"CONNECTING OTHER DEVICES" (p.12))

If your area experiences a high incidence of lightning or power surges, we recommend that you install surge

Note

protectors for the power and telephone lines. Surge protectors can be purchased from your retailer or at most

telephone specialty stores.

For Australia

Wall socket

For New Zealand

ABOUT THE OPERATION MANUALS

The operation manuals for the machine are as follows:

Facsimile Expansion Kit Operation Manual (this manual)

This manual explains the procedures for using the machine as a fax machine.

This manual only explains the fax functions of the machine. For general information on using the machine, including

safety information, installation, paper loading, removal of paper misfeeds, and peripheral equipment, see the

operation manual for the machine.

Adapter

Insert firmly until

you hear a "click".

LINE socket

Table of Contents