Toshiba Tecra M5 Maintenance Manual page 313

4.28 Hinge
4. Install the hinge (left) and secure it with the following screw.
• M2.5×4S
5. Install the earth plate and secure it with the following screw.
• M2×4B
6. Install the LCD cable holder B while engaging the latches.
7. Pass the wireless LAN and Bluetooth cables along the guides on the hinge.
8. Pass the wireless LAN and Bluetooth cables through the hole.
9. Stick the insulator.
10. Set the hinge on the top cover and secure with following screws.
• M2.5x3B
• M2.5x4B
11. Install LCD cable holder A while setting the latch.
TECRA M5 Maintenance Manual (960-542)
Tapping screw
S-THIN HEAD screw
S-THIN HEAD screw
FLAT HEAD screw
[CONFIDENTIAL]
4 Replacement Procedures
×1
×1
×2
×2
4-77